When we are deciding to using a Series Positive Displacement Flow Meter for measurement, it is necessary to follow certain operating procedures and keep in mind some precautions to make sure the measurement results’ accuration and relif. To use a Series Positive Displacement Flow Meter,there are something we should pay attention to,following are them:
Selecting the suitable flow meter:Choose suitable model and specificationsis important,basing on the physical properties and flow state of the measured gas, we can make decisions.
Inspecting before installation: Inspect all components of the flow meter to guarantee they are intact and don’t have problems like damaging or loosening. Meanwhile, verify the installation pipeline are meeting the M50C/M80C's requirements and is free of debris or blockages.
Install the flow meter: According to the manual,correctly install the flow meter on the measurement pipeline . Pay attention to the installation direction, sealing, and fixation,making sure that the flow meter can operate stably and reliably.
Avoid blockages: Before we begin to test, it’s necessary to check whether the measured gas contains a large amount of solid particles, liquid droplets, or high-viscosity impurities.These steps help us to avoid internal blockages or increased measurement errors in the flow meter.
Temperature and pressure compensation: During measurement,when the gas temperature or pressure changes, temperature and pressure compensation are needed to be performed to make sure the accuracy of the measurement results.
Regular maintenance:Maintain and inspect the flowmeter regularly, it includs many things to do such as cleaning internal components, replacing worn parts, and checking seals. Inspect not only helps extend the flowmeter's service life but also improves measurement accuracy, enabling M50C/M80C to provide precise measurements for a longer period.
Safety Operations: Strictly facing to safety procedures and operating guidelines during operation,keep the personnel and equipment from danger.
For certain special gases which are dangerous (such as flammable, explosive, toxic, or corrosive gases), extra safety measures and protective measures must be taken action. For example, use explosion-proof flow meters, install leak detection devices, and wear protective clothing.
When we are using Series Positive Displacement Flow Meter to measure, sufficient preparation and strict adherence to precautions are required, with operations conducted in accordance with the manual. Only by doing so can accurate and reliable measurement results be geat, providing strong support for subsequent production and management activities.
-
